Nissan Sentra B18 (2020-2025) Service Manual: Dtc/circuit Diagnosis
- B2c20-12 Starter Cut Relay
- B2c20-23 Starter Cut Relay
- B2f70-01 Stop Lamp
- B2f71-23 Stop Lamp
- B2f73-23 Clutch Switch
- B2fa9-11 Shift Position
- P161d Immobilizer
- P161f Immobilizer
- P161e Immobilizer
- B2033-4a Dongle Ng
- B2070-68 Key Registration
- B2090-14 Nats Antenna Amp.
- Brake Pedal Position Switch
- Cvt Shift Selector (detent Switch)
- Stop Lamp Switch
- Starter Cut Relay
- Hood Switch
- Clutch Master Cylinder (clutch Switch)
- Park/neutral Position (pnp) Switch
Additional Service When Replacing Control Unit
Ecm
Description
Description
Performing the following procedure can
automatically activate recommunication of ECM and BCM, but only
when the ECM is replaced with a new one*.
*: New on ...
B2c20-12 Starter Cut Relay
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Tro ...
Other materials:
Preparation
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
Descriptio ...
Ecu diagnosis information
Bcm
Reference value
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTC ...
Inspection (rh)
Inspection (RH)
INSPECTION AFTER REMOVAL
Check the following items and replace the part if
necessary.
Move the joint up/down, left/right, and in the
axial directions. Check for motion that is not smooth and for
significant looseness.
Check the bo ...
