Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen items (Trouble diagnosis content) |
DTC detecting condition |
|
|---|---|---|---|
|
P161E |
IMMOBILIZER (Immobilizer) |
Diagnosis condition |
Ignition switch ON |
|
Signal (terminal) |
— |
||
|
Threshold |
When CONSULT is not used during ECM replacement. |
||
|
Diagnosis delay time |
1 second or less |
||
POSSIBLE CAUSE
Intelligent Key unit
ECM
FAIL-SAFE
Inhibit engine cranking
Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “ENGINE”.
Is the DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
Dtc Diagnosis Procedure
ECM REGISTRATION
CONSULT
Register ECM.
Select “Self Diagnostic Result” mode of “ENGINE”.
Is the DTC detected?
YES >>GO TO 2.
NO >>Inspection End.
REPLACE INTELLIGENT KEY UNIT
CONSULT
Replace Intelligent Key unit. Refer to Removal and Installation.
Perform initialization of Intelligent Key unit and registration of all Intelligent Keys. Refer to CONSULT immobilizer mode and follow the on-screen instructions.
Select “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
Is the DTC detected?
YES>>GO TO 3.
NO>>Inspection End.
REPLACE ECM
Replace ECM. Refer to Removal and Installation.
Inspection End.
P161f Immobilizer
B2033-4a Dongle NgB1041-82 Vehicle Speed Signal
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC Detection Condition
...
Inspection
Inspection
BRAKE FLUID LEVEL
Make sure that the brake fluid level in the
master cylinder reservoir tank is between the MAX and MIN
lines.
Visually check around the master cylinder
reservoir tank for brake fluid leaks.
If ...
Failsafe
FailSafe
Display contents of
CONSULT
Fail-safe
Cancellation
B2001-45: Intelligent Key
unit
...