Nissan Sentra B18 (2020-2025) Service Manual: Brake Pedal Position Switch
Component Inspection
-
CHECK BRAKE PEDAL POSITION SWITCH
-
-
Ignition switch OFF.
-
Disconnect brake pedal position switch connector.
-
Check continuity between brake pedal position switch terminals.
Brake pedal position switch
Condition
Continuity
Terminals
1
2
Brake pedal
Not depressed
Yes
Depressed
No
-
Is the inspection result normal?
YES>>Inspection End.
NO>>Replace brake pedal position switch. Refer to Exploded View.
-
B2090-14 Nats Antenna Amp.
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Tro ...
Cvt Shift Selector (detent Switch)
Component Inspection
Component Inspection
CHECK CVT SHIFT SELECTOR (DETENTION
SWITCH)
Ignition switch OFF.
...
Other materials:
Unit disassembly and assembly
Center console assembly
Exploded View
Center console upper finisher
Center console side finisher (RH)
Center console side finisher (LH)
Center console side finisher screw cover
(LH/RH)
Center console assembly
Center console screw cover (LH/RH)
Center console rear finisher
C ...
Multi Remote Ent
Consult Function (bcm - Multi Remote Ent)
CONSULT Function
(BCM - MULTI REMOTE ENT)
DATA MONITOR
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For information (items) applicable to
this vehicle, refer to CONSULT display items ...
Parking Brake Rear Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
cup holder finisher. Refer to Exploded View.
Loosen the
adjusting nut (A).
CAUTION:
Do not reuse the adjusting nut if the nut is
removed.
Note:
It is not necessary to remove the fro ...
