Nissan Sentra B18 (2020-2025) Service Manual: Cvt Shift Selector (detent Switch)
Component Inspection
Component Inspection
-
CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)
-
-
Ignition switch OFF.
-
Disconnect CVT shift selector (detent switch) connector.
-
Check continuity between CVT shift selector (detent switch) terminals.
CVT shift selector (detent switch)
Condition
Continuity
Terminals
7
8
Selector lever: P position
Selector button: Released
No
Selector button: Pressed
Yes
Selector lever: Except P position
-
Is the inspection result normal?
YES >>Inspection End.
NO >>Replace CVT shift selector (detent switch). Refer to Removal and Installation.
-
Other materials:
Normal Operating Condition
Symptom Description
Symptom Description
FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)
If the status of that the engine speed is above 2,500 rpm under no
load (at 0 km/h and the selector lever position is P or N) takes more than the
specified time, fuel will be cut off after s ...
Engine Does Not Start When Intelligent Key Is Inside of Vehicle (one Key)
Diagnosis Procedure
Diagnosis Procedure
DESCRIPTION
Engine does not start when push-button ignition
switch is pressed. (One Intelligent Key has the symptom, other keys
operate normally.)
SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE
SYMPTOM, OTHER KEYS OPERATE NORMALLY)
...
Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit)
Abs Actuator and Electric Unit (control Unit)
Values on the Diagnosis Tool
Values on the
Diagnosis Tool
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle: For information (items) applicable to
this vehicle, refer to CONSULT display ...