Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Starter Cut Relay

Component Inspection

Component Inspection

  1. CHECK STARTER CUT RELAY

      1. Ignition switch OFF.

      2. Disconnect starter cut relay connector.

      3. Check continuity between starter cut relay terminals.

        Starter cut relay

        Condition

        Continuity

        Terminals

        3

        5

        12 V direct current supply between terminals 1 and 2

        Yes

        No current supply

        No

    Is the inspection result normal?

    YES>>

    Inspection End.

    NO>>

    Replace starter cut relay.

    Stop Lamp Switch
    Component Inspection Component Inspection CHECK STOP LAMP SWITCH Ignition switch OFF. Disconnect stop lamp switch connector. Check continuity between stop lamp switch terminals....
    Hood Switch
    Component Function Check Component Function Check CHECK FUNCTION CONSULT Select “Hood switch� and “HOOD SW (CAN)� in “Data Monitor� mode of “IPDM E/R�. Check “...

    Other materials:

    Basic Inspection
    Diagnosis and Repair Workflow Work Flow Work Flow OVERALL SEQUENCE DETAILED FLOW GET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/ma ...

    Intake Sensor
    Component Inspection Component Inspection CHECK INTAKE SENSOR Ignition switch OFF. Remove intake sensor. Refer to Removal and Installation. Check res ...

    All Doors Do Not Lock/unlock or Trunk/back Door Do Not Open with Request Switch
    Description Description All doors do not lock/unlock using front door request switch or trunk does not open using trunk opener request switch. Note: Before starting diagnosis check that Nissan Sentra vehicle condition is as shown in “Conditions of vehicle�, and check each ...