Nissan Sentra B18 (2020-2025) Service Manual: Dtc/circuit Diagnosis
- B20c7-11 A/c Clutch
- B20c7-15 A/c Clutch
- B20c8-14 Compressor (ecv)
- B24a4-11 Intake Sensor
- B24a4-15 Intake Sensor
- B24b4-02 A/c Control
- B24d4-08 A/c Control Comm
- B24f5-93 Mode Door Motor
- U1010-49 Control Unit(can)
- U2140-87 Can Comm Err (ecm)
- Power Supply and Ground Circuit
- Blower Motor
- Magnet Clutch
- Ecv (electrical Control Valve)
- Door Motor Circuit
- Sunload Sensor
- Intake Sensor
Door Motor Starting Position Reset
Description
Description
Reset signal is transmitted from A/C auto amp. to
air mix door motor and mode door motor. Starting position reset can
be performed.
Note: ...
B20c7-11 A/c Clutch
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
...
Other materials:
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis name)
DTC detection condition
...
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS ...
Diagnosis and repair workflow
Work flow
Overall sequence
Detailed flow
1. Obtain information about symptom
Interview the customer to obtain as much information as possible about the
conditions and environment under
which the malfunction occurred.
>> GO TO 2.
2. Confirm concern
Check the malfunction on the veh ...
