S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: Intake Sensor

Diagnosis Procedure

Diagnosis Procedure

  1. CHECK INTAKE SENSOR

      1. Ignition switch OFF.

      2. Remove intake sensor. Refer to Removal and Installation.

      3. Check resistance between intake sensor harness connector terminals. Refer to applicable table for the normal value.

        Intake sensor

        Condition

        Resistance: kΩ

        Terminals

        Temperature: °F (°C)

        1

        2

        −4 (−20)

        14.65

        14 (−10)

        8.26

        32 (0)

        4.85

        50 (10)

        2.96

        68 (20)

        1.87

        77 (25)

        1.50

        86 (30)

        1.22

        104 (40)

        0.81

    Is the inspection result normal?

    YES >>

    Inspection End.

    NO >>

    Replace intake sensor. Refer to Removal and Installation.

    Sunload Sensor
    Diagnosis Procedure Diagnosis Procedure CHECK SUNLOAD SENSOR SIGNAL Ignition switch ON. Check voltage between A/C auto amp. harness connector. A/C auto amp. Voltage (Approx.) Co...
    Symptom Diagnosis
    Heater and Air Conditioning System Control Symptoms Diagnosis Chart by Symptom Diagnosis Chart By Symptom Note: Perform the self-diagnoses with CONSULT before performing the sym...

    Other materials:

    C1f48-62 Vehicle Speed Sensor
    Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection conditi ...

    Precautions for Work
    Precautions for Work When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (disengaging) components with a screw ...

    B1231-11 Dtrl Rh Pwr Sply Circ
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition ...