Nissan Sentra B18 (2020-2025) Service Manual: Sonar System :: Dtc/circuit Diagnosis
- B2720 Corner Sensor [rl]
- B2721 Center Sensor [rl]
- B2722 Center Sensor [rr]
- B2723 Corner Sensor [rr]
- B2724 Sonar Contro Unit
- B272d Front Buzzer
- B273b Rear Sensor Power
- U0073 Control Module Comm Bus a Off
- U0075 Control Module Comm Bus C Off
- U1000 Can Comm Circuit
- U1010 Control Unit(can)
- U2141 Mac Comm Error (tcm)
- U2148 Mac Comm Error [abs Actuator and Electric Unit (control
- U214e Can Comm Err (combination Meter)
- U214f Can Comm Err (bcm)
- U2152 Can Comm Err (adas Control Unit)
- U215b Can Comm Err (ipdm E/r)
- Power Supply and Ground Circuit
Work Procedure
Work Procedure
Description
Vehicle specification needs to be written with
CONSULT after replacing sonar control unit.
Work Procedure (Before Replacement)
SAVING Nissan Sentra V ...
Other materials:
Adjustment of steering angle sensor neutral position
Description
Refer to the table below to determine if adjustment of steering
angle sensor neutral position is required.
×: Required –: Not required
Work Procedure
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION
CAUTION:
To adjust neutral position of steering angle sensor, ...
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
Dtc Confirmation Procedure
DTC Confirmation
Procedure
CONFIRMATION PROCEDURE
CONSULT
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more.
Stop the vehicle.
S ...
