Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Sonar System :: Dtc/circuit Diagnosis / U2141 Mac Comm Error (tcm)

Nissan Sentra B18 (2020-2025) Service Manual: U2141 Mac Comm Error (tcm)

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
U2141–87	CAN comm err (TCM) [CAN communication error (TCM)]	Diagnosis condition	Ignition switch ON
		Signal (terminal)	CAN communication signal
		Threshold	Communication error
		Diagnosis delay time	2 seconds or more

POSSIBLE CAUSE

CAN communication system (TCM)

FAIL-SAFE

Obstacle detection is disabled

Confirmation Procedure

DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Ignition switch OFF and wait at least 30 seconds.
  3. Ignition switch ON and wait at least 2 seconds or more.
  4. Select “Self Diagnostic Result” mode of “SONAR”.
Is DTC U2141–87 detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

PERFORM DTC CONFIRMATION PROCEDURE AGAIN
1. CONSULT
  1. Ignition switch ON.
  2. Erase DTC.
  3. Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.
Is DTC U2141–87 detected?
YES>>
Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
NO>>
Inspection End.

 U1010 Control Unit(can)

Dtc Description DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-Nissan Sentra vehicle multiplex c...

 U2148 Mac Comm Error [abs Actuator and Electric Unit (control

Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U2148–87 CAN comm err (brake control unit)...

Other materials:

P0447 Evap Canister Vent Control Valve
Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

Oil Filter
Removal and Installation Removal and Installation REMOVAL Remove the front under cover. Refer to Removal and Installation. Using suitable tool (A), remove the oil filter (1). CAUTION: Oil filter is provided with relief valve. Be ...

Action Test
Ldw Work Procedure Work Procedure Perform action test to verify the customer's concern. Perform action test and check the system operation after system diagnosis. Warning: Be careful of traffic conditions and safety around the ...