Nissan Sentra B18 (2020-2025) Service Manual: Roof :: Ecu Diagnosis Information. Moonroof Motor Assembly. Reference Value
Moonroof Motor Assembly. Reference Value. Reference Value
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
|
Terminal No. (Wire color) |
Description |
Condition |
Voltage (Approx.) |
|||
|---|---|---|---|---|---|---|
|
+ |
− |
Signal name |
Input/Output |
|||
|
1 (Y) |
Ground |
Auto ACC power supply |
Input |
Ignition switch OFF (auto ACC status) or ON |
Battery voltage |
|
|
Ignition switch OFF (not auto ACC status) |
0 V |
|||||
|
2 (W) |
Ground |
Tilt up signal |
Input |
Moonroof switch |
Tilt up position |
0 V |
|
Other than above |
Battery voltage |
|||||
|
4 (V) |
Ground |
Nissan Sentra Vehicle speed signal |
Input |
Speedometer operated [When Nissan Sentra vehicle speed is approx. 25 MPH (40 km/h)] |
Note:
The maximum voltage varies depending on the specification (destination unit).
|
|
|
5 (B) |
Ground |
Ground |
— |
— |
0 V |
|
|
6 (SB) |
Ground |
Ignition ON signal |
Input |
Ignition switch ON |
Battery voltage |
|
|
Other than above |
0 V |
|||||
|
7 (R) |
Ground |
Open signal |
Input |
Moonroof switch |
Open position |
0 V |
|
Other than above |
Battery voltage |
|||||
|
8 (G) |
Ground |
Close/Tilt down signal |
Input |
Moonroof switch |
Close/Tilt down position |
0 V |
|
Other than above |
Battery voltage |
|||||
Other materials:
Ecu Diagnosis Information. Adas Control Unit 2
Adas Control Unit 2
Values on the Diagnosis Tool
Values on the Diagnosis Tool
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For information (items) applicable to this
vehicle, refer to CONSULT display items.
...
P0201 Fuel Injector
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Handling Precaution
Handling Precaution
Handling Precaution
PRECAUTION FOR ICC SYSTEM SERVICE
CAUTION:
Turn the Drive Assist switch OFF in conditions
similar to driving, such as free rollers or a chassis
dynamometer.
Erase DTC when replacing parts ...