Nissan Sentra Owners Manual: Instruments and controls
- Instrument panel
- Meters and gauges
- Speedometer and odometer
- Tachometer
- Engine coolant temperature gauge
- Fuel gauge
- Trip computer
- Outside temperature display
- Compass display (if so equipped)
- Warning/indicator lights and audible reminders
- Security systems
- Windshield wiper and washer switch
- Rear window and outside mirror (if so equipped) defroster switch
- Headlight and turn signal switch
- Headlight control switch
- Instrument brightness control
- Turn signal switch
- Fog light switch (if so equipped)
- Horn
- Heated seats (if so equipped)
- Vehicle Dynamic Control (VDC) off switch
- Power outlet
- Storage
- Storage trays
- Storage pouch
- Seatback pockets (if so equipped)
- Sunglasses holder
- Cup holders
- Glove box
- Console box
- Slide front armrest (if so equipped)
- Cargo net (if so equipped)
- Windows
- Moonroof (if so equipped)
- Interior lights
- Dome light
- Map lights
- Trunk light
Supplemental air bag warning light
The supplemental air bag warning light,
displaying in the instrument panel,
monitors
the circuits for the air bag systems, pretensioners
and all related wiring.
When the ignition switch i ...
Instrument panel
Headlight/fog light (if so equipped)/turn
signal switch
Steering wheel switch for trip
computer, audio control and
Bluetooth® Hands-Free Phone System
(if so equipped)
Driver’s su ...
Other materials:
Connector symbols
Most of connector symbols in wiring diagrams are shown from the terminal
side.
Connector symbols shown from the terminal side are enclosed by
a single line and followed by the direction mark.
Connector symbols shown from the harness side are enclosed by
a double line and followed by the ...
P0462, P0463 Fuel level sensor
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0462 or P0463 is displayed with DTC UXXXX, first perform the
trouble diagnosis for DTC
UXXXX.
If DTC P0462 or P0463 is displayed with DTC P0607, first perform the
trouble diagnosis for DTC
P0607. Refer to EC-350, "DTC Logic".
...
Steering switch (meter control switch) signal circuit
Diagnosis Procedure
Regarding wiring diagram information, refer to mwi-28, "wiring diagram".
1.Check combination meter input signal
Turn ignition switch on.
Measure voltage between the following terminals of the combination
meter.
Is the inspection result normal?
Yes &g ...
