Nissan Sentra manuals

Nissan Sentra Owners Manual: Tachometer

The tachometer indicates engine speed in revolutions


The tachometer indicates engine speed in revolutions per minute (rpm). Do not rev engine into the red zone 1 .

CAUTION

When engine speed approaches the red zone, reduce engine speed. Operating the engine in the red zone may cause serious engine damage.

Speedometer and odometer
Speedometer The speedometer indicates the vehicle speed. Odometer/Twin trip odometer The odometer 2 and the twin trip odometer 1 are displayed when the ignition switch is placed in the ON p ...

Engine coolant temperature gauge
NOTE: The ignition switch must be placed in the ON position for the gauge to give a reading. The gauge indicates the engine coolant temperature. The engine coolant temperature is within the ...

Other materials:

Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is trans ...

Consult function
FUNCTION Diagnostic test mode Function Self Diagnostic Results Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly.* Data Monitor Input/Output data in the ECM can be read. ...

DTC/circuit diagnosis
U1000 can comm Description Refer to LAN-7, "CAN COMMUNICATION SYSTEM : System Description". Dtc logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms a ...

В© 2014-2019 Copyright www.nisentra.com