Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove high-mounted stop lamp. Refer to Removal and Installation.
Remove rear pillar finisher (LH/RH). Refer to Removal and Installation — Rear Pillar Upper Finisher.
Position rear seatback forward.
Remove the rear seatback finisher. Refer to Exploded View.
Route all rear seat belts through rear parcel shelf finisher.
Using a suitable tool, release clips and remove rear parcel shelf finisher. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
Exploded View
Exploded View
1.
Top tether strap anchor
finisher
...
Removal and Installation-Top Tether Strap Anchor Finisher
Removal and Installation-Top Tether Strap Anchor Finisher
REMOVAL
Using a
suitable tool, release top tether strap anchor finisher pawls.
Refer to Exploded View.
Remove the
top tet ...
Other materials:
Disposal
Disposal
Set the
strut horizontally with the piston rod fully extended.
Drill a 2
– 3 mm (0.08 – 0.12 in) hole at the position ()
from top as shown to release gas gradually.
CAUTION:
Wear eye protection (safety glasses).
Wear ...
FM/AM/SAT radio with compact disc (CD) player (Type A) (if so equipped)
For all operation precautions, see “Audio operation
precautions” in this section.
Audio main operation
VOL (volume) knob / PWR (power) button:
Place the ignition switch in the ACC or ON
position and press the VOL (volume) knob /PWR
(power) button while the system is off to call up
the mod ...
System description
Component parts
Component parts location
Ipdm e/r
System
Relay control system
Relay control system : system diagram
Relay control system : system description
Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF
control according to the input ...
