Nissan Sentra B18 (2020-2025) Service Manual: Rear Parcel Shelf Finisher
Exploded View
Exploded View
|
1. |
Top tether strap anchor finisher |
2. |
High-mounted stop lamp |
3. |
Rear parcel shelf finisher |
|
4. |
Rear seatback finisher |
|
Pawl |
|
Clip |
|
|
Metal clip |
Removal and Installation
Removal and Installation
REMOVAL
Remove high-mounted stop lamp. Refer to Removal and Installation.
Remove rear pillar finisher (LH/RH). Refer to Removal and Installation — Rear Pillar Upper Finisher.
Position rear seatback forward.
Remove the rear seatback finisher. Refer to Exploded View.
Route all rear seat belts through rear parcel shelf finisher.
Using a suitable tool, release clips and remove rear parcel shelf finisher. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation-Top Tether Strap Anchor Finisher
Removal and Installation-Top Tether Strap Anchor Finisher
REMOVAL
Using a suitable tool, release top tether strap anchor finisher pawls. Refer to Exploded View.
Remove the top tether strap anchor finisher.
INSTALLATION
Installation is in the reverse order of removal.
Other materials:
Power Supply, Ground & Circuit Elements. Basic Inspection
Battery
How to Handle Battery
How to Handle Battery
CAUTION:
If it becomes necessary to start the engine with
a booster battery and jumper cables, use a 12-volt booster
battery.
After connecting battery cables, ensure that they
...
Park/neutral Position Switch
Component Inspection
Component Inspection
CHECK PARK/NEUTRAL POSITION
SWITCH-1
Turn ignition switch ON.
Check the voltage between ECM harness
connector and ground.
...
Intelligent Key Button Operation Has Poor Range (one Key)
Description
Description
Intelligent Key button operation has poor range.
(One Intelligent Key has the symptom, other keys operate
normally.)
SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE
SYMPTOM, OTHER KEYS OPERATE NORMALLY)
...