Nissan Sentra B18 (2020-2025) Service Manual: Floor Trim
Exploded View
Exploded View
|
1. |
Floor trim |
2. |
Front floor spacer (RH) |
3. |
Front floor spacer (LH) |
|
4. |
Rear floor spacer (RH) |
5. |
Rear floor spacer (LH) |
|
Pawl |
|
|
Front |
|
Clip |
Removal and Installation
Removal and Installation
REMOVAL
Remove front seat assemblies. Refer to the following.
-
Refer to Removal and Installation - Seat Assembly (Driver Seat).
-
Refer to Removal and Installation - Seat Assembly (Passenger Seat).
Remove rear seat cushion assembly. Refer to Removal and Installation - Seat Cushion Assembly.
Remove dash side finishers (LH/RH). Refer to Removal and Installation.
Remove center pillar lower finishers (LH/RH). Refer to Removal and Installation.
Remove rear pillar lower finishers (LH/RH). Refer to Removal and Installation - Rear Pillar Lower Finisher.
Remove lap pre-tensioner anchor bolt (LH/RH). Refer to Exploded View.
Remove M/T shift selector assembly or CVT shift selector assembly. Refer to Removal and Installation (6MT: RS6F94R), or Removal and Installation (CVT: RE0F10D).
Remove rear floor duct (Canada only). Refer to Removal and Installation - Rear Floor Duct.
Remove air bag diagnosis sensor unit. Refer to Removal and Installation.
Remove parking brake control. Refer to Removal and Installation (HAND LEVER WITH REAR DRUM BRAKES) or Removal and Installation (HAND LEVER WITH REAR DISC BRAKES).
Remove
steering member (1) bolts (A).
Disconnect
drain hose (1).
Using a
suitable tool (A), release pawl and open the harness protector as
shown.
:
Pawl
Remove floor trim.
INSTALLATION
Installation is in the reverse order of removal.
Other materials:
B1360 Combination Meter
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
B2fa9-11 Shift Position
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detecting condition
...
Primary Pressure Solenoid Valve Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK HARNESS CONNECTOR
Ignition switch OFF.
Check the mating condition of TCM
harness connector and CVT unit harness
connector.
Is the inspect ...

