Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation-Top Tether Strap Anchor Finisher
REMOVAL
Using a suitable tool, release top tether strap anchor finisher pawls. Refer to Exploded View.
Remove the top tether strap anchor finisher.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
Removal and Installation
REMOVAL
Remove
high-mounted stop lamp. Refer to Removal and Installation.
Remove rear
pillar finisher (LH/RH). Refer to Removal and Installation — Rear Pill ...
Floor Trim
...
Other materials:
P1212 Tcs Communication Line
Dtc Description
DTC Description
This CAN communication line is used to control the smooth
engine operation during the TCS operation. Pulse signals are exchanged
between ECM and “ABS actuator and electric unit (control
unit)”.
Be sure to erase the ma ...
Battery
Keep the battery surface clean and dry.
Clean the battery with a solution of baking
soda and water.
Make certain the terminal connections are
clean and securely tightened.
If the vehicle is not to be used for 30 days or
longer, disconnect the negative (-) battery
terminal cable to p ...
P0712 Transmission fluid temperature sensor A
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P0712
FLUID TEMP SENSOR A
(Transmission Fluid Temperature
Sensor A Circuit Low)
The CVT fluid temperature identified by the
TCM is 1 ...
