Exploded View
|
1. |
Optical sensor |
2. |
Mask |
3. |
Instrument panel assembly |
|
|
Pawl |
Removal and Installation
REMOVAL
Using a suitable tool, release the optical sensor from the instrument panel assembly.
Disconnect the harness connector from the optical sensor.
INSTALLATION
Installation is in the reverse order of removal.
Hazard SwitchIcc System Cannot Be Set (main Switch Turns On/off)
Diagnosis Procedure
Diagnosis Procedure
The ICC MAIN switch can be turned ON/OFF, but the ICC system
cannot be set even if the SET- switch is pressed.
Note:
The system cannot be set in the following case.
When own Nissan Sentra vehicle is travelling below the speed of
...
Fuel-filler cap
WARNING
Gasoline is extremely flammable and
highly explosive under certain conditions.
You could be burned or seriously
injured if it is misused or mishandled.
Always stop the engine and do not
smoke or allow open flames or sparks
near the vehicle when refuelin ...
P0796-00 Pressure Control Solenoid C
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
...