Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Component Inspection

Component Inspection

  1. CHECK TRUNK ROOM LAMP SWITCH

      1. Ignition switch OFF.

      2. Disconnect trunk lid opener assembly (ajar switch)connector.

      3. Check continuing between trunk lid opener assembly (ajar switch) terminal.

        Trunk lid opener assembly (ajar switch)

        Condition

        Continuity

        Terminals

        1

        2

        Trunk lid

        Open

        Yes

        Close

        No

    Is the inspection result normal?

    YES >>

    Inspection End.

    NO >>

    Replace trunk lid opener assembly (ajar switch). Refer to Removal and Installation.

Diagnosis Procedure
Diagnosis Procedure CHECK TRUNK ROOM LAMP SWITCH INPUT SIGNAL Ignition switch OFF. Check vol ...

Trunk Lid Opener Actuator
...

Other materials:

Unit removal and installation
TRANSAXLE ASSEMBLY Exploded View Transaxle assembly Refer to INSTALLATION Removal and Installation WARNING: Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. Wrap a thick cloth around the cap. ...

Service equipment
RECOVERY/RECYCLING RECHARGING EQUIPMENT Be certain to follow the manufacturer’s instructions for machine operation and machine maintenance. Do not introduce any refrigerant other than that specified into the machine. ELECTRICAL LEAK DETECTOR Be certain to follow the manufacturer’s ...

C1609 Vehicle speed signal
DTC Logic Dtc detection logic DTC Display item Malfunction detected condition Possible cause C1609 CAN VHCL SPEED Malfunction is detected in vehicle speed signal that is output from abs actuator and electric unit (control unit) via can communication. ...

© 2014-2026 Copyright www.nisentra.com