Nissan Sentra B18 (2020-2025) Service Manual: B2f06-11 Back Door/trunk Opener Switch
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen items (Trouble diagnosis content) |
DTC detecting condition |
|
|---|---|---|---|
|
B2F06-11 |
Back door/trunk opener switch (Back door/trunk opener switch) |
Diagnosis condition |
Ignition switch ON |
|
Signal (terminal) |
Trunk lid opener switch signal (BCM connector terminal: 12) |
||
|
Threshold |
When the BCM detects the open or shorted circuit of the trunk lid opener switch |
||
|
Diagnosis delay time |
1 second or less |
||
POSSIBLE CAUSE
-
Trunk lid opener switch
-
Harness or connectors (trunk lid opener switch circuit is open or shorted)
-
BCM
FAIL-SAFE
–
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Select “Self Diagnostic Result” mode of “BCM”.
-
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair. Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
CHECK TRUNK LID OPENER INPUT SIGNAL
-
-
Ignition switch OFF.
-
Disconnect trunk lid opener switch connector.
-
Check voltage between trunk lid opener switch harness connector and ground.
(+)
(–)
Voltage
(Approx.)
Trunk lid opener switch
Connector
Terminal
M15
2
Ground
Battery voltage
-
Is the inspection result normal?
YES>>GO TO 3.
NO>>GO TO 2.
-
-
CHECK TRUNK LID OPENER SWITCH CIRCUIT
-
-
Disconnect BCM connector.
-
Check continuity between BCM harness connector and trunk lid opener switch harness connector.
BCM
Trunk lid opener switch
Continuity
Connector
Terminal
Connector
Terminal
M84
12
M15
2
Yes
-
Check continuity between BCM harness connector and ground.
BCM
—
Continuity
Connector
Terminal
M84
12
Ground
No
-
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>Repair or replace harness.
-
-
CHECK TRUNK LID OPENER SWITCH GROUND CIRCUIT
-
Check continuity between trunk lid opener switch harness connector and ground.
Trunk lid opener switch
—
Continuity
Connector
Terminal
M15
3
Ground
Yes
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace harness.
-
-
CHECK TRUNK LID OPENER SWITCH
-
Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>Replace trunk lid opener switch. Refer to Removal and Installation.
-
Other materials:
B0012-55 Active Vent
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC Detection Condition
...
Body Welding and Precautions
Outline of Welding
Features of Welding
Features of Welding
No restrictions on the shape of joint
Reduction in weight compared to using of bolts or
rivets
Great strength
Airtight and watertight
High working ef ...
A/c Switch Assembly Signal Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK WITH SELF DIAGNOSTIC RESULT FUNCTION
CONSULT
Select “Self Diagnostic Result” mode of “HVAC”.
Check DTC.
...