Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: Dtc/circuit Diagnosis / U215b-87 Can Comm Err (ipdm E/r)

Nissan Sentra B18 (2020-2025) Service Manual: U215b-87 Can Comm Err (ipdm E/r)

Dtc Description

DTC Description

DESCRIPTION

CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Sentra vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN High-line, CAN Low-line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to System Description.

DTC DETECTION LOGIC

DTC No.	CONSULT screen items (Trouble diagnosis content)	DTC Detection Condition
U215B-87	CAN comm err (IPDM E/R) [CAN communication error (IPDM E/R)]	Diagnosis condition	Ignition switch ON
		Signal (terminal)	CAN communication signal
		Threshold	Transmission error or reception error
		Diagnosis delay time	2 seconds or more

POSSIBLE CAUSE

CAN communication system

FAIL-SAFE

—

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON and wait for 2 seconds or more.
  2. Select “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
Is DTC detected?
YES>>
Refer to DTC Diagnosis Procedure.
NO>>
To check malfunction symptom before repair. Refer to Intermittent Incident.
NO>>
Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

CHECK CAN COMMUNICATION
1. Check CAN communication. Refer to Trouble Diagnosis Flow Chart.
Is DTC “U215B-87” displayed?
YES >>
Repair or replace the malfunctioning part.
NO >>
Check intermittent incident. Refer to Intermittent Incident.

 U214f-87 Can Comm Err (bcm)

Dtc Description DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex ...

 B2f06-11 Back Door/trunk Opener Switch

Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2F06-11 Back door/trunk opener switch (Back...

Other materials:

Power Window Lock Switch
Description Description Ground circuit of main power window and door lock/unlock switch shuts off if power window lock switch of main power window and door lock/unlock switch is operated. This inhibits all operation, except for the main switch. Component Function Check Component Funct ...

Clutch Point Learning
Description Description TCM memorizes a clutch point (engagement timing), and this enables accurate control. For work procedure, refer to Work Procedure. Work Procedure Work Procedure CLUTCH POINT LEARNING With CONSULT Start the engine. ...

Operation
Switch Name and Function Switch Name and Function STEERING SWITCH The steering switch is located on the steering wheel. Transmits the steering switch signal to the combination meter. ...