Nissan Sentra B18 (2020-2025) Service Manual: Unit Disassembly and Assembly
- Torque Converter and Converter Housing Oil Seal
- Cvt Fluid Temperature Sensor
- Input Speed Sensor
- Belt and Pulleys
Other materials:
Normal Operating Condition
Symptom Description
Symptom Description
FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)
If the status of that the engine speed is above 2,500 rpm under no
load (at 0 km/h and the selector lever position is P or N) takes more than the
specified time, fuel will be cut off after s ...
Sunload Sensor
Diagnosis Procedure
Diagnosis Procedure
CHECK SUNLOAD SENSOR SIGNAL
Ignition switch ON.
Check voltage between A/C auto amp. harness connector.
...
Fail-Safe
Fail-safe
FAIL-SAFE CONTROL BY DTC
BCM performs fail-safe control when any DTC are
detected.
Display contents of CONSULT
Fail-safe
B2C21-23: Seat belt buc ...