Nissan Sentra B18 (2020-2025) Service Manual: Squeak and Rattle Trouble Diagnoses

Diagnosis Procedure

Diagnosis Procedure PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to Description. Is the inspection r ...

Work Flow

Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to docum ...

Other materials:

VDC/TCS/ABS
Symptom Table If ABS warning lamp and SLIP indicator lamp turn ON, perform self-diagnosis. NOTE: 1: The ABS does not operate when the speed is 10 km/h (6 MPH) or less. 2: Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depr ...

AV branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the av control unit for damage, bend and loose connection (unit side and connector side). Is the inspection result normal ...

Removal and Installation - Front Door Satellite Sensor
Removal and Installation - Front Door Satellite Sensor Warning: Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes. Do not use air tools or elec ...