Nissan Sentra B18 (2020-2025) Service Manual: Front Door Finisher
Exploded View
Exploded View
|
1. |
Front door panel |
2. |
Front door finisher |
3. |
Inside door handle escutcheon |
|
4. |
Main power window and door lock/unlock switch finisher |
5. |
Door mirror corner finisher |
|
Front |
|
|
Clip |
|
Pawl |
LH side shown; RH similar.
Removal and Installation
Removal and Installation
CAUTION:
-
When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
-
Do not damage the door panel.
REMOVAL
Using a
suitable tool, release pawls and remove inside door handle
escutcheon (1).
:
Pawl
Remove bolt
(A).
Remove main power window and door lock/unlock switch. Refer to Removal and Installation.
Remove bolt
(A).
Using a
suitable tool, release clips of front door finisher. Refer to Exploded View.
Remove front door finisher as
shown.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips are accurately aligned with the holes on the door panel, then press in.
Other materials:
P0746-00 Pressure Control Solenoid a
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
P27b5-00 Control Module
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
Secondary Pressure Solenoid Valve Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK HARNESS CONNECTOR
Ignition switch OFF.
Check the mating condition of TCM
harness connector and CVT unit harness
connector.
Is the inspect ...

