Nissan Sentra B18 (2020-2025) Service Manual: Does Not Stop Fully-Open or Fully-Closed Position. Diagnosis Procedure
Diagnosis Procedure
-
PERFORM INITIALIZATION PROCEDURE
-
Perform initialization procedure.
Refer to Description.
Is the inspection result normal?
YES >>Inspection End.
NO >>Perform basic inspection. Refer to Work Flow.
-
Other materials:
Idle Start/stop System Inoperative
Diagnosis Procedure
Diagnosis Procedure
Note:
Check the idle start/stop system operation condition.
Refer to System Description.
CHECK START/STOP PROHIBIT CAUSE
With CONSULT
Select “Stop/Start prohibit cause data
recorder” in “WORK SUPPORT” mode ...
Turn Signal Lamp Circuit
Component Function Check
Component Function
Check
CHECK TURN SIGNAL LAMP OPERATION
CONSULT
Select “FLASHER” in "Active Test" mode of “BCM(FLASHER)".
With operating the t ...
P0500 Vss
Dtc Description
DTC Description
ECM receives vehicle speed signals from two different paths via
CAN communication line: One is from the ABS actuator and electric unit (control
unit) via the combination unit and the other is from TCM.
DTC DETECTION LOGIC
...