Nissan Sentra B18 (2020-2025) Service Manual: Shift Position Indicator Circuit
Component Parts Function Inspection
Component Parts Function Inspection
-
CHECK SHIFT POSITION INDICATOR
-
Start the engine.
-
Shift selector lever.
-
Check that the shift position and the shift position indicator on the combination meter are identical.
Is the inspection result normal?
YES >>INSPECTION END
NO >>Go to Diagnosis Procedure.
-
Diagnosis Procedure
Diagnosis Procedure
-
CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT-
Start the engine.
-
Select “Data Monitor” in “TRANSMISSION”.
-
Select “RANGE”.
-
Shift selector lever.
-
Check that shift position , “RANGE” on CONSULT screen, and shift position indicator display on combination meter are identical.
Is the check result normal?
YES >>INSPECTION END
NO-1>>“RANGE” is changed but is not displayed on shift position indicator : Check “Self Diagnostic Result” in “TRANSMISSION”.
NO-2>>“RANGE” and shift position indicator are different : Check “Self Diagnostic Result” in “TRANSMISSION”.
NO-3>>Specific “RANGE” is not displayed on shift position indicator : Check “Self Diagnostic Result” in “METER/M&A”.
-
Other materials:
Clutch. Removal and Installation
Clutch Pedal
Exploded View
Exploded View
1.
Clutch pedal
2.
Clutch master cylinder
...
B1040-22 Vehicle Speed
Dtc Description
DTC Description
DTC DETECTION LOGIC
Note:
This DTC may be detected when drive the Nissan Sentra vehicle
at vehicle speed of 186 MPH (300 km/h) or more.
DTC No.
CONSULT sc ...
Diagnosis System (a/c Amp.)
Diagnosis Description
Diagnosis Description
CONSULT performs the following functions via CAN
communication with A/C amp.:
Diagnostic mode
CGW Status
Descrip ...