Component Function Check

Component Function Check

1. CHECK DRIVE SPORT MODE FUNCTION-1

   1. Ignition switch ON.

   2. Shift the selector lever to “D” position.

   3. Check the drive sport mode indicator turns ON/OFF when drive sport mode switch is operated.

   Is the inspection results normal?

   YES >>

   INSPECTION END

   NO >>

   GO TO 2.

2. CHECK DRIVE SPORT MODE FUNCTION-2

   1. Start the engine.

   2. Drive the Nissan Sentra vehicle.

   3. Maintain the following conditions.

      Selector lever	: “D” POSITION
      Nissan Sentra Vehicle speed	: Constant vehicle speed of 30 km/h (19 MPH) or more on the flat road.

   4. Check the engine speed when drive sport mode switch is operated.

   Is the engine speed changed?

   YES >>

   Check drive sport mode indicator. Refer to Diagnosis Procedure.

   NO >>

   Check drive sport mode switch. Refer to Diagnosis Procedure.

Diagnosis Procedure

Diagnosis Procedure

1. CHECK DTC (TCM)

   With CONSULT

   1. Ignition switch ON.

   2. Check “Self Diagnostic Results” and "Network-DTC" in “TRANSMISSION”.

   Is any DTC detected?

   YES >>

   Check DTC detected item. Refer to DTC Index.

   NO >>

   GO TO 2.

2. CHECK DTC (COMBINATION METER)

   With CONSULT

   Check “Self Diagnostic Results” and "Network-DTC" in “METER/M&A”.

   Is any DTC detected?

   YES >>

   Check DTC detected item. Refer to DTC Index (TYPE A) or DTC Index (TYPE B). For details of TYPE, refer to Information.

   NO >>

   GO TO 3.

3. CHECK TCM INPUT/OUTPUT SIGNAL

   With CONSULT

   1. Select “Data Monitor” in “TRANSMISSION”.

   2. Select “Ds mode signal”.

   3. Check that “Ds mode signal” turns ON/OFF when drive sport mode switch is operated. Refer to Reference Value.

   Is the inspection result normal?

   YES >>

   Replace combination meter. Refer to Removal and Installation (TYPE A) or Removal and Installation (TYPE B). For details of TYPE, refer to Information.

   NO >>

   Check drive sport mode switch. Refer to Component Function Check.