Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Front Cable
Removal and Installation
REMOVAL
Remove the center console assembly. Refer to Removal and Installation.
Remove the driver seat. Refer to Removal and Installation.
Remove the adjusting nut from the parking brake pedal assembly. Refer to Exploded View.
CAUTION:
Do not reuse the adjusting nut.
Position the floor trim aside.
Position the floor insulator aside.
Remove the nuts and the bolt from the front parking brake cable. Refer to Exploded View.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1). 
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the front parking brake cable.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the adjustment. Refer to Adjustment.
-
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse the adjusting nut.
Parking Brake Control
Exploded View
Exploded View
1.
Front parking brake
cable
...
Parking Brake Rear Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
center console assembly. Refer to Removal and Installation.
Insert a
suitable tool onto the adjusting nut (A) a ...
Other materials:
Power supply and ground circuit
WITH INTELLIGENT KEY SYSTEM
WITH INTELLIGENT KEY SYSTEM : Diagnosis Procedure
Regarding Wiring Diagram information, refer to BCS-51, "Wiring Diagram".
1.Check fuses and fusible link
Check that the following fuses and fusible link are not blown.
Is the fuse blown?
Yes >> r ...
Heated Oxygen Sensor 2 Heater
Component Inspection
Component Inspection
CHECK HEATED OXYGEN SENSOR 2
HEATER
Turn ignition switch OFF.
Disconnect heated oxygen sensor 2
harness connector.
Check resistance between ...
Power supply and ground circuit
Bcm (body control system) (with intelligent key system)
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure
Regarding Wiring Diagram information, refer to BCS-51, "Wiring Diagram".
1.CHECK FUSES AND FUSIBLE LINK
Check that the following fuses and fusible link ...
