Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Rear Cable
Removal and Installation
REMOVAL
Remove the center console assembly. Refer to Removal and Installation.
Insert a
suitable tool onto the adjusting nut (A) and rotate the adjusting
nut to fully loosen the cable, then release the parking brake
pedal. 
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
Note:
It is not necessary to remove the adjusting nut.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1). 
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the rear under cover (LH/RH). Refer to Removal and Installation.
Reposition the exhaust heat insulator.
Remove the rear parking brake cable from the underbody bracket.
Separate the rear parking brake cable from the toggle lever. Refer to Exploded View.
Remove the bolts from the rear parking brake cable. Refer to Exploded View.
Remove the rear parking brake cable from the Nissan Sentra vehicle.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the adjustment. Refer to Adjustment.
-
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
Parking Brake Front Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
center console assembly. Refer to Removal and Installation.
Remove the
driver seat. Refer to Removal and Instal ...
Parking Brake Switch
Removal and Installation
Removal and Installation
REMOVAL
Set the
parking brake pedal in the completely released
position.
Disconnect
the harness connector from the parking bra ...
Other materials:
Reference Value
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
Terminal No.
(Wire color)
Description
Condition
Voltage
...
Receiving a call
When a call is placed to the connected phone,
the display will change to phone mode.
To accept the incoming call, either:
Press the button on
the steering
wheel, or
Touch the green phone icon on the screen.
To reject the incoming call, either:
Press the button on the
...
Selector Lever Knob
Selector Lever Knob: Removal & Installation
SELECTOR LEVER
KNOB: Removal & Installation
REMOVAL
Slide the shift selector finisher
boot (3) down.
Using a suitable tool, remove the
lock pin (2) by pulling it toward the front of Nissan Sentra vehicle.
Note:
...
