Nissan Sentra B18 (2020-2025) Service Manual: License Plate Lamp
Component Inspection
Component Inspection
-
CHECK LICENSE PLATE LAMP 1
-
-
Ignition switch OFF.
-
Disconnect license plate lamp connector.
-
Check continuity between license plate lamp terminals.
License plate lamp
Continuity
Terminals
1
2
Yes
-
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace corresponding license plate lamp. Refer to Removal and Installation.
-
-
CHECK LICENSE PLATE LAMP 2
-
-
Remove license plate lamp bulb.
-
Check continuity between license plate lamp terminals.
License plate lamp
Continuity
Terminals
1
2
No
-
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair or replace license plate lamp bulb socket or harness.
-
Other materials:
P0137 Ho2s2
Dtc Description
DTC Description
The heated oxygen sensor 2 has a much longer switching time
between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen storage
capacity of the three way catalyst (manifold) causes the longer switching
time.
...
Front Door Speaker
Diagnosis Procedure
Diagnosis Procedure
CONNECTOR CHECK
Check the AV control unit and speaker connectors
for the following:
Proper connection
Damage
...
C161a-86 Abs System
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...