Nissan Sentra B18 (2020-2025) Service Manual: Inspection
INSPECTION AFTER REMOVAL
Shock Absorber
Check the following items and replace the parts if necessary.
Check the shock absorber for oil leaks, deformation, cracks, and other damage.
Check the piston rod for damage, uneven wear, and distortion.
Bound Bumper, Bushing
Check for cracks and damage. Replace the parts if necessary.
Washer, Bound Bumper Cover, Distance Tube
-
Check for cracks and damage. Replace the parts if necessary.
Removal and Installation
Removal and Installation
REMOVAL
Remove
wheel and tire. Refer to Removal and Installation.
Place a
suitable jack under the outer end of the rear lower link to relieve
the coil spr ...
Disposal
Disposal
Set the
shock absorber horizontally with the piston rod fully
extended.
Drill a 2
– 3 mm (0.08 – 0.12 in) hole at the position ()
from the top as shown to release g ...
Other materials:
Push-Button Ignition Switch
Removal and Installation
Removal and
Installation
REMOVAL
Remove shift selector finisher using
the following steps:
Remove the CVT shift selector knob. Refer to Removal & Installation.
Using a suitable tool, release clips and pawls.
: ...
Additional service when removing battery negative terminal
Description
When the battery negative terminal is disconnected, the initialization is
necessary for normal operation of
power window system.
CAUTION:
The following specified operations can not be performed under the
non-initialized condition.
Auto-up operation
Anti-pinch function
Wo ...
Diagnosis system (BCM)
Common item
Common item : consult function (bcm - common item)
Application item
Consult performs the following functions via can communication with bcm.
System application
Bcm can perform the following functions.
Intelligent key
Intelligent key : consult function (bcm - intelligent ke ...
