Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove wheel and tire. Refer to Removal and Installation.
Place a suitable jack under the outer end of the rear lower link to relieve the coil spring tension.
Warning:
Place a suitable jack under the outer end of the rear lower link.
CAUTION:
Do not damage the rear lower link with suitable jack.
Remove the lower rear shock absorber bolt with suitable tool.
Gradually lower the suitable jack to separate the rear shock absorber from the rear lower link
Remove the
rear shock absorber upper nuts (
).
Remove the rear shock absorber.
CAUTION:
Do not hit or damage the shock absorber piston rod. Hold the shock absorber body.
Inspect the components. Refer to Inspection.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the final tightening of the parts under the unladen conditions with the tires on the ground.
Exploded View
Exploded View
1.
Piston rod lock nut
2.
...
Inspection
Inspection
INSPECTION AFTER REMOVAL
Shock Absorber
Check the following items and replace the parts
if necessary.
Check the
shock absorber for oil leaks, deformation, cracks, and other
...
Other materials:
Diagnosis Procedure
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM
TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO
2.
CHECK INTELLIGENT KEY BATTER ...
Dtc Description
DTC Description
DESCRIPTION
CAN (Controller Area Network) is a serial communication
line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication
line with high data communication speed and excellent error detection
ability. Modern Nissan Sentra vehicle i ...
P2138 App Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
