Nissan Sentra B18 (2020-2025) Service Manual: Disposal
Set the shock absorber horizontally with the piston rod fully extended.
Drill a 2
– 3 mm (0.08 – 0.12 in) hole at the position (
)
from the top as shown to release gas gradually. 
CAUTION:
-
Wear eye protection (safety glasses).
-
Wear gloves.
-
Be careful with metal chips or oil blown out by the compressed gas.
-
Drill vertically in this direction (
)
directly to the outer tube avoiding brackets. -
The gas is clear, colorless, odorless, and harmless.
|
(A) |
: 20 – 30 mm (0.79 – 1.18 in) |
Position the drilled hole downward and drain oil by moving the piston rod several times.
CAUTION:
Dispose of drained oil according to the law and local regulations.
Inspection
Inspection
INSPECTION AFTER REMOVAL
Shock Absorber
Check the following items and replace the parts
if necessary.
Check the
shock absorber for oil leaks, deformation, cracks, and other
...
Other materials:
Front combination lamp
Exploded view
Large cover (not serviceable)
Small cover (not serviceable)
Front combination lamp
Halogen lamp bulb (high beam)
Turn signal lamp bulb
Turn signal lamp bulb socket
LED harness connector
Halogen lamp bulb (high beam)
harness connector
Halogen lamp bulb (low b ...
Warning/indicator/chime List
Warning Lamp/indicator Lamp
Warning Lamp/Indicator
Lamp
Name
Design
Layout/Function
EPS warning lamp
...
Commercial Service Tools
Commercial Service Tools
(TechMate No.)
Tool name
Description
(NI-39565)
Engine Ear
...
