S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: Engine Mounting Insulator (rh)

Exploded View

Exploded View

CVT Models

1.

Engine mounting insulator (LH)

2.

Engine mounting insulator (RH)

3.

Torque rod stay

4.

Torque rod

5.

Torque rod bracket

6.

Engine mounting bracket (LH)

7.

Engine mounting support (LH)

A.

Refer to Removal and Installation.

B.

Refer to Removal and Installation.

C.

Refer to Removal and Installation.

M/T Models

1.

Engine mounting insulator (LH)

2.

Engine mounting insulator (RH)

3.

Torque rod stay

4.

Torque rod

5.

Torque rod bracket

6.

Engine mounting bracket (LH)

7.

Engine mounting support (LH)

A.

Refer to Removal and Installation.

B.

Refer to Removal and Installation.

C.

Refer to Removal and Installation.

Removal and Installation

Removal and Installation

REMOVAL

Remove the front under cover. Refer to Removal and Installation.

Support the engine and transaxle assembly using a suitable jack.

CAUTION:

Do not damage oil pan (lower) or transaxle oil pan when supporting engine.

  • Place a piece of wood or equivalent between the suitable jack and supporting surface and secure in a stable condition.

Remove bolts and remove the engine mounting insulator (RH).

INSTALLATION

Install the engine mounting insulator (RH) tighten the engine side bolts to the specified torque in the sequence shown.

Bolts

: 45.0 N·m (4.6 kg-m, 33 ft-lb)

Tighten the body side bolts for the engine mounting insulator (RH).

  • Verify the distance (C) is within range 9.5 - 11.5 mm (0.374 - 0.453 in). If distance is not within range, loosen bolts and adjust to within the range and tighten to the specified torque.

    (A)

    : Body side measuring surface

    (B)

    : Engine side measuring surface

Installation of the remaining components is in the reverse order of removal.

    Engine Mounting Insulator (lh)
    Exploded View Exploded View CVT Models 1. Engine mounting insulator (LH) 2. Engine mounting insulator (RH) 3. Torque rod stay 4. Torque rod 5. Torque rod bracket 6. Engine mount...
    Torque Rod
    Exploded View Exploded View CVT Models 1. Engine mounting insulator (LH) 2. Engine mounting insulator (RH) 3. Torque rod stay 4. Torque rod 5. Torque rod bracket 6. Engine mount...

    Other materials:

    Cvt Belt Inspection
    Component Inspection Component Inspection Set the vehicle on 2-post car lift. Set the CVT to N position. Secure the right front tire with a suitable strap . This will assist in making the belt turn. Mark the left fron ...

    C1f5f-A2 Distance Sensor
    Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection conditi ...

    Tire Pressure Monitoring System (TPMS)
    Each tire on the Nissan Sentra, including the spare tire if equipped, should be inspected at least once a month when the tires are cold and inflated to the pressure recommended by the vehicle manufacturer. This information is shown on the vehicle placard or the tire inflation pressure label. I ...