Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure

DTC Diagnosis Procedure

  1. CHECK CAN COMMUNICATION

    1. Check CAN communication. Refer to Trouble Diagnosis Flow Chart.

    Is DTC “U214F-87” displayed?

    YES>>

    Repair or replace the malfunctioning part.

    NO>>

    Check intermittent incident. Refer to Intermittent Incident.

Confirmation Procedure
Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON and wait for 2 s ...

U215b-87 Can Comm Err (ipdm E/r)
...

Other materials:

Service Notice or Precautions for Steering System
In case of removing steering gear assembly, make the final tightening with grounded and unloaded vehicle condition, and then check wheel alignment. Observe the following precautions when disassembling. Before disassembly, thoroughly clean the outside of the unit. ...

Precautions when starting and driving
WARNING Do not leave children or adults who normally require assistance unattended in your Nissan Sentra. Pets should also never be left alone inside the vehicle. They could accidentally injure themselves or others through unintended operation of vehicle controls. In addition, on ho ...

Select Learning
Work Procedure Work Procedure Note: Always perform Clutch Point Learning before Select Learning. Perform Select Learning with CVT fluid temperature below 50°C (122°F) and again with fluid temperature above 50°C (122°F). ...

© 2014-2026 Copyright www.nisentra.com