Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: Dtc/circuit Diagnosis / U214f-87 Can Comm Err (bcm) / Confirmation Procedure

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON and wait for 2 seconds or more.
  2. Select “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
Is DTC detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair. Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with hig ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure CHECK CAN COMMUNICATION Check CAN communication. Refer to Trouble Diagnosis Flow Chart. Is DTC “U214F-87” ...

Other materials:

Laser/radar (distance Sensor)
C2580-44 Control Unit Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC dete ...

DTC/Circuit diagnosis
U0073 COMMUNICATION BUS A OFF DTC Logic DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition Possible causes U0073 COMM BUS A OFF (Control Module Communication Bus A Off) TCM communication blockage lasts for 2 sec ...

Parking Brake Switch Signal Circuit
Component Function Check Component Function Check CHECK COMBINATION METER INPUT SIGNAL CONSULT Select “PKB SW” in “Data Monitor” mode of “METER/M&A”. Check tha ...