Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure
-
PERFORM SELF DIAGNOSIS RESULT
-
CONSULT-
Ignition switch ON.
-
Erase "Self Diagnostic Result" mode of "EPS/DAST 3".
-
Ignition switch OFF and wait for at least 10 seconds.
-
Start the engine.
CAUTION:
Never drive the Nissan Sentra vehicle.
-
Select "Self Diagnostic Result" mode of “EPS/DAST 3”.
-
Is DTC “C1604-96” detected?
YES>>Torque sensor is malfunctioning. Replace steering gear assembly. Refer to Removal and Installation.
NO>>Check pin terminal and connection of each harness connector for malfunctioning conditions.
-
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
...
Other materials:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system ...
Removal and Installation
Removal and Installation
Warning:
Clean dust on the brake caliper and the brake
pads using a vacuum dust collector to minimize the hazards of
airborne particles or other material.
CAUTION:
Do not depress the brake pedal while removing the
...
Supplemental air bag warning light
The supplemental air bag warning light,
displaying in the instrument panel,
monitors
the circuits for the air bag systems, pretensioners
and all related wiring.
When the ignition switch is placed in the ON or
START position, the supplemental air bag warning
light illuminates for about ...
