Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
-
TIRE PRESSURE SENSOR ID REGISTRATION
-
Perform tire pressure sensor ID registration. Refer to Work Procedure.
Does low tire pressure warning lamp turn OFF?
YES >>Inspection End.
NO >>Replace BCM. Refer to Removal and Installation.
-
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Select “Self Diagnostic Result” mode of “BCM(AIR
PRESSURE MONI ...
Other materials:
Removal and Installation
Removal and Installation
REMOVAL
Using
suitable tool (A), with protective tape (B), release roof side
molding from rear metal clip.
: Metal clip
:
Front
Pull up
roof side molding from rear end to front end.
:
Front
CAUTION:
Use care when pulling ...
Body Exterior Paint Color
Body Exterior Paint Color
Body Exterior
Paint Color
Component
Color code
KH3
...
System
SRS air bag system
SRS AIR BAG SYSTEM : System Diagram
SRS AIR BAG SYSTEM : System Description
The air bag deploys if the air bag diagnosis sensor unit is activated
while the ignition switch is in the ON or
START position.
The collision modes for which supplemental restraint systems ...
