Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Dtc/circuit Diagnosis. Position Switch

Position Switch

Back-Up Lamp Switch

Component Inspection

Component Inspection

  1. CHECK BACK-UP LAMP SWITCH

      1. Disconnect position switch harness connector. Refer to Removal and Installation.

      2. Check continuity between position switch terminals.

      Terminals

      Condition

      Continuity

      1

      2

      Reverse gear position

      Existed

      Except reverse gear position

      Not existed

    Is the inspection result normal?

    YES >>

    INSPECTION END

    NO >>

    Replace position switch. Refer to Removal and Installation.

Park/neutral Position (pnp) Switch

Component Inspection

Component Inspection

  1. CHECK PARK/NEUTRAL POSITION (PNP) SWITCH

      1. Disconnect position switch harness connector. Refer to Removal and Installation.

      2. Check continuity between position switch terminals.

      Terminals

      Condition

      Continuity

      2

      3

      Neutral gear position

      Existed

      Except neutral gear position

      Not existed

    Is the inspection result normal?

    YES >>

    INSPECTION END

    NO >>

    Replace position switch. Refer to Removal and Installation.

    System Description
    Component Parts Component Parts Location Component Parts Location A. Transaxle assembly No. Component Function 1. Position switch It detects that the transaxle is in neutral. It...
    Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting
    Noise, Vibration and Harshness (nvh) Troubleshooting Nvh Troubleshooting Chart NVH Troubleshooting Chart Use the chart below to find the cause of the symptom. The numbers indica...

    Other materials:

    Periodic Maintenance
    Headlamp Aiming Adjustment Aiming Adjustment Aiming Adjustment PREPARATION BEFORE ADJUSTING Before performing aiming adjustment, check the following: Ensure all tires are inflated to correct pressure. Place Nissan Sentra vehicle and screen on l ...

    B2223-16 Combination Meter
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition ...

    Secondary Speed Sensor Circuit
    Diagnosis Procedure Diagnosis Procedure CHECK HARNESS CONNECTOR - 1 Ignition switch OFF. Check the mating condition of TCM harness connector and secondary speed sensor harness connector. ...