Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detected condition |
||
|---|---|---|---|---|
|
B2223-16 |
Combination meter (Combination meter) |
Diagnosis condition |
When ignition switch is ON. |
|
|
Signal (terminal) |
— |
|||
|
Threshold |
TFT error is detected |
|||
|
Diagnosis delay time |
— |
|||
POSSIBLE CAUSE
Combination meter
FAIL-SAFE
—
Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “METER/M&A”.
Is DTC B2223-16 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
Dtc Diagnosis Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select erase “Self Diagnostic Result” mode of "METER/M&A".
Perform DTC confirmation procedure. Refer to DTC Confirmation Procedure.
Is DTC detected?
YES >>Replace combination meter. Refer to Removal and Installation.
NO >>Inspection End.
Idle Start/stop System Inoperative
Diagnosis Procedure
Diagnosis Procedure
Note:
Check the idle start/stop system operation condition.
Refer to System Description.
CHECK START/STOP PROHIBIT CAUSE
With CONSULT
Select “Stop/Start prohibit cause data
recorder” in “WORK SUPPORT” mode ...
B2f70-01 Stop Lamp
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detecting condition
...
B120e-04 Ipdm E/r
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detection condition
...