Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Diagnosis Procedure

Diagnosis Procedure

  1. CHECK TRUNK LID OPENER REQUEST SWITCH OUTPUT SIGNAL

      1. Ignition switch OFF.

      2. Check voltage between trunk lid opener request switch harness connector and ground.

        (+)

        (–)

        Voltage

        (Approx.)

        Trunk lid opener request switch

        Connector

        Terminal

        B14

        1

        Ground

        Battery voltage

    Is the inspection result normal?

    YES >>

    GO TO 3.

    NO >>

    GO TO 2.

  2. CHECK TRUNK LID OPENER REQUEST SWITCH CIRCUIT

      1. Disconnect BCM connector and trunk lid opener request switch connector.

      2. Check continuity between BCM harness connector and trunk lid opener request switch harness connector.

        BCM

        Trunk lid opener request switch

        Continuity

        Connector

        Terminal

        Connector

        Terminal

        M85

        98

        B14

        1

        Yes

      3. Check continuity between BCM harness connector and ground.

        BCM

        Continuity

        Connector

        Terminal

        M85

        98

        Ground

        No

    Is the inspection result normal?

    YES>>

    Replace BCM. Refer to Removal and Installation.

    NO>>

    Repair or replace harness.

  3. CHECK TRUNK LID OPENER REQUEST SWITCH GROUND CIRCUIT

      1. Disconnect trunk lid opener request switch connector.

      2. Check continuity between trunk lid opener request switch harness connector and ground.

        Trunk lid opener request switch

        Continuity

        Connector

        Terminal

        B14

        4

        Ground

        Yes

    Is the inspection result normal?

    YES >>

    GO TO 4.

    NO >>

    Repair or replace harness.

  4. CHECK TRUNK LID OPENER REQUEST SWITCH

    1. Refer to Component Inspection.

    Is the inspection result normal?

    YES >>

    GO TO 5.

    NO >>

    Replace trunk lid opener request switch. Refer to Removal and Installation.

  5. CHECK INTERMITTENT INCIDENT

    1. Refer to Intermittent Incident.

    >>

    Inspection End.

Component Function Check
Component Function Check CHECK FUNCTION CONSULT Select "Request switch BD/TR" in "Data Monitor" mode of "B ...

Component Inspection
Component Inspection CHECK TRUNK LID OPENER REQUEST SWITCH Ignition switch OFF. Disc ...

Other materials:

Component Function Check
Component Function Check Note: Before performing the diagnosis, check that the following items are normal: Interior room lamp power supply circuit Front room/map lamp assembly bulb Rear personal lamp bulb CHECK INTERIOR ...

Component Parts
Eco Mode System Component Parts Location Component Parts Location A. Instrument lower panel LH COMPONENT DESCRIPTION ...

Removal and Installation
Removal and Installation CAUTION: Before replacing BCM, perform “ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM)” to save or print current Nissan Sentra vehicle specification. Refer to Description. When replacing the BCM ...

© 2014-2026 Copyright www.nisentra.com