Nissan Sentra B18 (2020-2025) Service Manual: Component Function Check
-
CHECK FUNCTION
-
CONSULT-
Select "Request switch BD/TR" in "Data Monitor" mode of "BCM(TRUNK)".
-
Select that the function operates normally according to the following conditions:
Monitor item
Condition
Status
Request switch BD/TR
Trunk lid opener request switch
Pressed
On
Released
Off
-
Is the inspection result normal?
YES >>Trunk lid opener request switch is OK.
NO >>Refer to Diagnosis Procedure.
-
Diagnosis Procedure
Diagnosis Procedure
CHECK TRUNK LID OPENER REQUEST
SWITCH OUTPUT SIGNAL
Ignition switch OFF.
...
Other materials:
Precautions
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along wit ...
Calibration of Decel G Sensor
Description
Description
CAUTION:
Always perform the decel G sensor calibration
before driving when the following operation is performed:
Note:
Yaw rate/side/decel G sensor calibration is
performed when performing the decel G sensor calibration.
×: Required —: No ...
Work Procedure
Work Procedure
SYSTEM INITIALIZATION
Perform system initialization. Refer to Work Procedure.
>>
GO TO 2.
CHECK ANTI-PINCH FUNCTION
Check anti-pinch function. Refer to Work Proce ...
