Before performing the diagnosis, check that the following items are normal:
Interior room lamp power supply circuit
Front room/map lamp assembly bulb
Rear personal lamp bulb
CHECK INTERIOR ROOM LAMP CONTROL FUNCTION
CONSULT
Switch the map lamp switch and room lamp switch to DOOR position.
Ignition switch ON.
Select “INT LAMP” in "Active Test" mode of "BCM(INT LAMP)".
With operating the test items, check that each interior room lamp turns ON/OFF.
|
On |
: Interior room lamp ON |
|
Off |
: Interior room lamp OFF |
Does the interior room lamp turns ON/OFF?
YES >>Interior room lamp control circuit is normal.
NO >>Refer to Diagnosis Procedure.
Diagnosis ProcedureDtc Diagnosis Procedure
DTC Diagnosis
Procedure
CHECK FUSE
Ignition switch OFF.
Check that the following fuse is not blown (open):
...
Exploded View
Exploded View
1.
Wiper blade (RH)
2.
Wiper arm (RH)
3.
Wiper drive asse ...
Battery replacement
WARNING
Ingestion hazard: Death or serious injury may occur if a battery is ingested.
A swallowed button cell or coin battery can cause severe internal chemical
burns in as little as 2 hours.
Always keep new and used batteries out of the reach of children.
Be careful to prevent children ...