Nissan Sentra B18 (2020-2025) Service Manual: Condenser
Inspection and Repair
Inspection and Repair
INSPECTION
When
measuring voltage, wrap tin foil around the top of the negative
probe. Then press the foil against the wire with your
finger.
Attach
...
Removal and Installation
Removal and Installation
REMOVAL
Remove the
rear pillar finisher. Refer to Removal and Installation — Rear Pillar
Upper Finisher.
Disconnect
harness connectors (A).
Remove b ...
Other materials:
Work Flow
Work Flow
OVERALL SEQUENCE
Reference 1: Refer to CONSULT Function.
Reference 2: Refer to DTC Index.
Reference 3: Refer to Symptom Table.
DETAILED FLOW
INTERVIEW AND SYMPTOM
CONFIRMATION
Check ...
Camshaft Valve Clearance
Inspection and Adjustment
Inspection and Adjustment
INSPECTION
Perform inspection as follows after removal,
installation or replacement of camshaft or valve-related parts, or
if there is unusual engine conditions regarding valve
clearance.
Remove
rocker cover. Refer to Remo ...
Hazard switch
Component function check
1.Check hazard switch signal by consult
Consult data monitor
Turn ignition switch ON.
Select hazard sw of bcm (flasher) data monitor item.
While operating the hazard switch, check the monitor status.
Is the inspection result normal?
Yes >> hazard swi ...
