Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove the rear pillar finisher. Refer to Removal and Installation — Rear Pillar Upper Finisher.
Disconnect harness connectors (A).
Remove bolt
(B) and the condenser (1). 
:
Front
INSTALLATION
-
Installation is in the reverse order of removal.
Note:
Tighten to specification. bolt
: 8.0 N·m (0.82 kg-m, 6 ft-lb)
Condenser
...
Other materials:
Removal and Installation
Removal and
Installation
CAUTION:
Front bumper fascia is made of resin. Use care
when handling to prevent damage. Avoid contact with oily substances.
REMOVAL
Remove clips (A) and core support
cover (1).
Remove apron bracket. Refer to Removal and Installation.
...
Removal and Installation
Removal and Installation
REMOVAL
Remove the
wheel and tire using power tool. Refer to Exploded View.
Remove the
lock plate from the front coil spring and strut and reposition the
brake hose. Refer to Exploded View.
Separate
the stabilizer connecting rod from the front co ...
Transmitter
Exploded View
Transmitter (tire pressure sensor)
O-ring
Valve stem nut
Valve core
Valve cap
Valve stem assembly
Parts that are replaced as a set
when the tire is replaced.
Removal and Installation
REMOVAL
Remove road wheel and tire assembly using power tool.
Remove val ...
