Nissan Sentra B18 (2020-2025) Service Manual: Center Pillar Upper Finisher
Removal and Installation
REMOVAL
Remove center pillar lower finisher. Refer to Removal and Installation.
Pull seat
belt height adjuster cover in the direction shown and
remove.
:
Pawl
Remove
D-ring anchor bolt (A).
Remove
center pillar upper finisher.
Apply
protective tape (A) to protect the component from damage as
shown.
Using
a suitable tool, release center pillar upper finisher (1) cap pawl
and remove.
:
Pawl
Using
a suitable tool, release clip and remove center pillar upper
finisher. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips are accurately aligned with the holes on body panel, then press in.
Center Pillar Lower Finisher
Removal and Installation
Removal and Installation
CAUTION:
When removing, always use a remover tool that is
made of plastic to prevent damage to the parts.
...
Rear Pillar Finisher
Removal and Installation - Rear Pillar Upper Finisher
Removal and Installation - Rear Pillar Upper Finisher
REMOVAL
Remove rear
pillar lower finisher. Refer to Removal and Installation - Re ...
Other materials:
Precautions on child restraints
WARNING
Failure to carefully follow all warnings and instructions regarding the
proper use and installation of child restraints can result in serious injury
or death to a child or other passengers during a sudden stop or collision in
the Nissan Sentra:
The child restraint must ...
Removal and Installation
Removal and Installation
REMOVAL
Using a
suitable tool, release clips and pawls and remove rear power window
switch finisher (1). Note:
RH shown; LH similar
: Pawl
...
B13cf Buttons
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
