Nissan Sentra B18 (2020-2025) Service Manual: Rear Pillar Finisher
Removal and Installation - Rear Pillar Upper Finisher
REMOVAL
Remove rear pillar lower finisher. Refer to Removal and Installation - Rear Pillar Lower Finisher.
Using a
suitable tool, release clips and remove rear pillar upper finisher
(1).
: Clip
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that all clips are accurately aligned with the holes on body panel, then press in.
Removal and Installation - Rear Pillar Lower Finisher
REMOVAL
Remove the rear seat bolster. Refer to Removal and Installation - Rear Seat Bolster.
Remove the rear kicking plate. Refer to Removal and Installation.
Using a
suitable tool, release clips and remove rear pillar lower finisher
(1).
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips and pawls are accurately aligned with the holes on body panel, then press in.
Center Pillar Upper Finisher
Removal and Installation
Removal and Installation
REMOVAL
Remove
center pillar lower finisher. Refer to Removal and Installation.
Pull seat
belt height adjuster cover in the direct ...
Other materials:
Precautions on supplemental restraint system
This Supplemental Restraint System (SRS) section
contains important information concerning
the following systems:
Driver and passenger supplemental frontimpact
air bag (NISSAN Advanced Air Bag
System)
Front seat-mounted side-impact supplemental
air bag
Roof-mounted curtain side-impac ...
Dtc Confirmation Procedure
DTC Confirmation Procedure
DTC CONFIRMATION
CONSULT
Ignition switch ON and wait for 2 seconds or
more.
Select “Self Diagnostic Result” mode
...
ECU diagnosis information
A/C AUTO AMP
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one
based on the following priority
chart.
DTC Index
*: Perform self ...
