Nissan Sentra B18 (2020-2025) Service Manual: Center Pillar Lower Finisher
Removal and Installation
CAUTION:
-
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
-
Do not damage the body panel.
REMOVAL
Move front seat to the full forward position.
Remove front and rear body side welts. Refer to Removal and Installation.
Using a
suitable tool, release clips and remove center pillar lower
finisher (1).
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips are accurately aligned with the holes on body panel, then press in.
Body Side Welt
Removal and Installation
Removal and Installation
FRONT
Removal
Remove dash
side finisher. Refer to Removal and Installation.
Remove
front body side welt.
CAUTION:
Us ...
Center Pillar Upper Finisher
Removal and Installation
Removal and Installation
REMOVAL
Remove
center pillar lower finisher. Refer to Removal and Installation.
Pull seat
belt height adjuster cover in the direct ...
Other materials:
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
Steering wheel switch for audio control
Menu control switch / OK button
(back) switch
(SEEK/TRACK) buttons
Volume control switch
SEEK/TRACK buttons
On the Nissan Sentra, the SEEK/TRACK switches provide different functions depending
on how long they are pressed. Pressing the switch for more than ...
How to Use This Section
Information
Information
“CAN” of LAN Section describes information
peculiar to a vehicle and inspection procedures.
For trouble diagnosis procedure, refer to Trouble Diagnosis Flow Chart of “CAN
FUNDAMENTAL”.
Abbreviation List
Abb ...
