Nissan Sentra B18 (2020-2025) Service Manual: Body Side Welt
Removal and Installation
FRONT
Removal
Remove dash side finisher. Refer to Removal and Installation.
Remove front body side welt.
CAUTION:
Use care not to stretch out welt if it is to be reused.
Installation
Installation is in the reverse order of removal.
REAR
Removal
Remove rear kicking plate inner. Refer to Removal and Installation.
Remove rear body side welt.
CAUTION:
Use care not to stretch out welt if it is to be reused.
Installation
Installation is in the reverse order of removal.
Dash Side Finisher
Removal and Installation
Removal and Installation
REMOVAL
Remove
front kicking plate. Refer to Removal and Installation.
Remove dash
side finisher.
Using
a suitable tool, r ...
Center Pillar Lower Finisher
Removal and Installation
Removal and Installation
CAUTION:
When removing, always use a remover tool that is
made of plastic to prevent damage to the parts.
...
Other materials:
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
P0462, P0463 Fuel level sensor
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0462 or P0463 is displayed with DTC UXXXX, first perform the
trouble diagnosis for DTC
UXXXX.
If DTC P0462 or P0463 is displayed with DTC P0607, first perform the
trouble diagnosis for DTC
P0607. Refer to EC-350, "DTC Logic".
...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
DETERMINE MALFUNCTION TYPE
CONSULT
Ignition switch ON.
Ignition switch OFF and wait at least 30
seconds.
...
