Removal and Installation
Removal
Remove passenger side rear pillar finisher. Refer to Removal and Installation — Rear Pillar Upper Finisher.
Remove
screw (A) from antenna amp (1). 
Disconnect the harness connector and remove the antenna amp.
Installation
Installation is in the reverse order of removal.
Bose® Speaker Amp
Satellite AntennaMain Power Supply and Ground Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK TCM POWER CIRCUIT - 1
Ignition switch OFF.
Disconnect TCM harness
connector.
Check voltage between TCM harness
connector terminals ...
Description
Description
Intelligent Key button operation has poor
range.
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE
THE SAME SYMPTOMS)
Door lock operation (remote
keyless entry)
Door ...
Trunk room lamp circuit
Description
Controls the trunk room lamp (ground side) to turn the trunk room lamp on and
off.
Diagnosis Procedure
Regarding wiring diagram information, refer to inl-17, "wiring diagram".
Caution:
Before performing the diagnosis, check that the following are normal.
Interior roo ...