Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Main Power Supply and Ground Circuit

Nissan Sentra B18 (2020-2025) Service Manual / Transmission & Driveline / Transaxle & Transmission :: Cvt: Re0f15a / Dtc/circuit Diagnosis / Main Power Supply and Ground Circuit

Diagnosis Procedure

Diagnosis Procedure

  1. CHECK TCM POWER CIRCUIT - 1

    1. Ignition switch OFF.

    2. Disconnect TCM harness connector.

    3. Check voltage between TCM harness connector terminals and ground.

      +

      −

      Voltage

      TCM

      Connector

      Terminal

      F23

      45

      Ground

      10 – 16 V

      46

    Is the inspection result normal?

    YES >>

    GO TO 2 .

    NO >>

    GO TO 4.

  2. CHECK TCM POWER CIRCUIT - 2

    Check voltage between TCM harness connector terminals and ground.

    +

    −

    Test condition

    Voltage

    TCM

    Connector

    Terminal

    F23

    47

    Ground

    Ignition switch ON

    10 – 16 V

    48

    Ignition switch OFF

    Approx. 0 V

    Is the inspection result normal?

    YES >>

    GO TO 3.

    NO >>

    GO TO 5.

  3. CHECK TCM GROUND CIRCUIT

    Check continuity between TCM harness connector terminals and ground.

    TCM

    —

    Continuity

    Connector

    Terminal

    F23

    41

    Ground

    Existed

    42

    Is the inspection result normal?

    YES >>

    Check intermittent incident. Refer to Intermittent Incident.

    NO >>

    Repair or replace damaged parts.

  4. DETECT MALFUNCTION ITEMS - 1

    Check the following items:

    • Open circuit or short circuit in harness between battery positive terminal and TCM connector terminal 45, 46.

    • 10A fuse (No. 67)

    Is the inspection result normal?

    YES >>

    Check intermittent incident. Refer to Intermittent Incident.

    NO >>

    Repair or replace damaged parts.

  5. CHECK CIRCUIT BETWEEN IPDM E/R AND TCM

    1. Ignition switch OFF.

    2. Disconnect IPDM E/R harness connector.

    3. Check continuity between IPDM E/R harness connector terminal and TCM harness connector terminals.

      IPDM E/R

      TCM

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      F96

      70

      F23

      47

      Existed

      48

    Is the check result normal?

    YES >>

    GO TO 6.

    NO >>

    Repair or replace damaged parts.

  6. DETECT MALFUNCTIONING ITEMS - 2

    Check the following items:

    • Open circuit or short circuit in harness between ignition switch and IPDM E/R. Refer to Wiring Diagram.

    • Short circuit in harness between IPDM E/R harness connector terminal 70 and TCM harness connector terminals 47, 48

    • 10A fuse (No. 87)

    • IPDM E/R

    Is the check result normal?

    YES >>

    Check intermittent incident. Refer to Intermittent Incident.

    NO >>

    Repair or replace damaged parts.

Cvt Belt Inspection
Component Inspection Component Inspection Set the vehicle on 2-post car lift. Set the CVT to N position. Secure the right front tire with a suitable ...

Transmission Range Switch Circuit
Diagnosis Procedure Diagnosis Procedure CHECK HARNESS CONNECTOR Ignition switch OFF. Check the mating condition of TCM ...

Other materials:

Vehicle information
Identification information Model Variation Identification Number Vehicle identification number (VIN) plate Vehicle identification number (chassis number) Emission control information label Air Conditioner specification label F.M.V.S.S./C.M.V.S.S. certificat ...

Dtc Description
DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Sentra vehicle i ...

Combination Switch Reading System
Component Parts Location Component Parts Location A. Combination switch (lighting and turn signal switch) B. Combination s ...

© 2014-2026 Copyright www.nisentra.com